жүктеу мүмкіндігіне ие боласыз
Бұл материал сайт қолданушысы жариялаған. Материалдың ішінде жазылған барлық ақпаратқа жауапкершілікті жариялаған қолданушы жауап береді. Ұстаз тілегі тек ақпаратты таратуға қолдау көрсетеді. Егер материал сіздің авторлық құқығыңызды бұзған болса немесе басқа да себептермен сайттан өшіру керек деп ойласаңыз осында жазыңыз
1 жыл бойы шексіз жүктеңіз
"Scientific and Technological Progress"
Scientific and Technological Progress
The unified, interrelated, progressive development of science and technology.
The origins of scientific and technological progress lie in the manufactory production of the 16th to 18th centuries, when theconvergence of theoretical scientific and technical activity began. Before that time, material production evolved slowly, mainlythrough the accumulation of empirical experience, trade secrets, and the collection of formulas. At the same time, equallyslow progress took place in theoretical and scientific knowledge of nature, which was influenced by theology andScholasticism and did not exert a permanent or at all significant influence on production. Scientific progress andtechnological progress were two relatively independent, although mediated, streams of human activity.
In the 16th century the requirements of trade, navigation, and large manufactories necessitated the theoretical andexperimental solution of a number of specific problems. At that time science, influenced by the ideas of the Renaissance,gradually broke with the Scholastic tradition and turned to practical matters. The compass, gunpowder, and printing(especially the last of these) were three great inventions that gave rise to the strong alliance between scientific and technicalactivity. Attempts to use water-powered mills for the needs of expanding manufactory production prompted the theoreticalstudy of certain mechanical processes. The theories of the flywheel, gyrational motion, and the channel were established,and the study of water head, resistance, and friction began. “During the manufactory period were developed the first scientificand technical elements of Modern Mechanical Industry” (K. Marx, in K. Marx and F. Engels, Soch., 2nd ed., vol. 23, p. 388).Galileo, Newton, and E. Torricelli, and later D. Bernoulli, E. Mariotte, J. L. D’Alembert, R. A. Reaumur, H. Davy, L. Euler, andmany others, gave science the reputation of the “servant of production.”
The rise of machine production in the late 18th century was made possible by the preceding scientific and technical creativityof a large army of mathematicians, mechanics, physicists, inventors, and skilled laymen. J. Watt’s steam engine was a “fruitof science,” and not simply of technical design endeavor. Machine production,in turn, opened up new, virtually unlimitedpotential for the technological application of science. The progress of machine production was increasingly determined by theprogress of science, and such production itself became for the first time an “objectively embodied science”. All this signified a transition to a new, second stage of scientific and technological progress,characterized by mutual stimulation of the development of science and technology at an ever-faster pace. Special linksemerged in scientific research that had the function of bringing theoretical concepts to technical embodiment (appliedresearch, experimental design work, and production research). Scientific and technical activity became one of the broadestspheres of application of human labor.
The third stage of scientific and technological progress is associated with the present-day scientific and technologicalrevolution. The range of scientific disciplines that are oriented toward technological development is expanding under itsinfluence.Biologists, physiologists, psychologists, linguists, and logicians are participating in the solution of engineeringproblems. Many fields of the social sciences also directly or indirectly affect the acceleration of technological progress. Suchfields include production economics and organization, scientific management of economic and social processes, specificsocial research, production aesthetics, the psychologyand logic of technical creativity, and forecasting. The leading role ofscience with respect to technology is becoming increasingly apparent. Entire sectors of production, such as electronics,atomic energy, the chemistry of synthetic materials,and computer production, form as a consequence of new scientificorientations and discoveries. Science is becoming a force that continuously revolutionizes technology. Technology, in turn,also continuously stimulates scientific progress by raising newdemands and tasks and by sustaining science withincreasingly precise and sophisticated experimental equipment. A characteristic feature of modern scientific and technological progress is that it encompasses not only industry but also many other aspects of the vital activity of society,such as agriculture, transportation, communications, medicine, education, and everyday life. The unity of scientific andtechnical activity finds explicit embodiment in mankind’s penetration of space.
Scientific and technological progress is the foundation of social progress. Under capitalism, however, scientific andtechnological progress is accomplished chiefly in the interests of the ruling class, is used for militaristic, misanthropicpurposes, and frequently is accompanied by regression of spiritual values and destruction of humanindividuality. Undersocialism, scientific and technological progress is accomplished in the interests of all the people, and the successfuldevelopment of science and technology promotes the solution of the body of economic and social tasks of communistconstruction and the creation of the material and spiritual prerequisites for comprehensive and harmonious development ofthe individual.
Plastic pollution
Plastic pollution is the accumulation of plastic objects (e.g.: plastic bottles and much more) in the Earth's environment that adversely affects wildlife, wildlife habitat, and humans. Plastics that act as pollutants are categorized into micro-, meso-, or macro debris, based on size. Plastics are inexpensive and durable, and as a result levels of plastic production by humans are high. However, the chemical structure of most plastics renders them resistant to many natural processes of degradation and as a result they are slow to degrade.Together, these two factors have led to a high prominence of plastic pollution in the environment.
Plastic pollution can afflict land, waterways and oceans. It is estimated that 1.1 to 8.8 million metric tons (MT) of plastic waste enters the ocean from costal communities each year. Living organisms, particularly marine animals, can be harmed either by mechanical effects, such as entanglement in plastic objects or problems related to ingestion of plastic waste, or through exposure to chemicals within plastics that interfere with their physiology. Humans are also affected by plastic pollution, such as through disruption of various hormonalmechanisms.
As of 2018, about 380 million tons of plastic is produced worldwide each year. From the 1950s up to 2018, an estimated 6.3 billion tons of plastic has been produced worldwide, of which an estimated 9% has been recycled and another 12% has been incinerated.[7] In the UK alone, more than 5 million tonnes of plastic are consumed each year, of which only an estimated one-quarter is recycled, with the remainder going to landfills. This large amount of plastic waste inevitably enters the environment, with studies suggesting that the bodies of 90% of seabirds contain plastic debris. In some areas there have been significant efforts to reduce the prominence of plastic pollution, through reducing plastic consumption and promoting plastic recycling.
Some researchers suggest that by 2050 there could be more plastic than fish in the oceans by weight.
Types of plastic debris
There are three major forms of plastic that contribute to plastic pollution: microplastics as well as mega- and macro-plastics. Mega- and micro plastics have accumulated in highest densities in the Northern Hemisphere, concentrated around urban centers and water fronts. Plastic can be found off the coast of some islands because of currents carrying the debris. Both mega- and macro-plastics are found in packaging, footwear, and other domestic items that have been washed off of ships or discarded in landfills. Fishing-related items are more likely to be found around remote islands. These may also be referred to as micro-, meso-, and macro debris.
Plastic debris is categorized as either primary or secondary. Primary plastics are in their original form when collected. Examples of these would be bottle caps, cigarette butts, and microbeads. Secondary plastics, on the other hand, account for smaller plastics that have resulted from the degradation of primary plastics.
Microdebris
Microdebris are plastic pieces between 2 mm and 5 mm in size. Plastic debris that starts off as meso- or macrodebris can become microdebris through degradation and collisions that break it down into smaller pieces. Microdebrisis more commonly referred to as nurdles. Nurdles are recycled to make new plastic items, but they easily end up released into the environment during production because of their small size. They often end up in ocean waters through rivers and streams. Microdebris that come from cleaning and cosmetic products are also referred to as scrubbers. Because microdebris and scrubbers are so small in size, filter-feeding organisms often consume them.
Primary microplastics, a type of microdebris, known as Nurdles enter the ocean by means of spills during transportation or from land based sources. These micro-plastics can accumulate in the oceans and allow for the accumulation of Persistent Bio-accumulating Toxins such as DDT and PCB's which are hydrophobic in nature and can cause adverse health affects.
A 2004 study by Richard Thompson from the University of Plymouth, UK, found a great amount of microdebris on the beaches and waters in Europe, the Americas, Australia, Africa, and Antarctica. Thompson and his associates found that plastic pellets from both domestic and industrial sources were being broken down into much smaller plastic pieces, some having a diameter smaller than human hair. If not ingested, this microdebris floats instead of being absorbed into the marine environment. Thompson predicts there may be 300,000 plastic items/km2 of sea surface and 100,000 plastic particles/km2 of seabed. International pellet watch collected samples of polythene pellets from 30 beaches from 17 countries which were then analysed for organic micro-pollutants. It was found that pellets found on beaches in America, Vietnam and southern Africa contained compounds from pesticides suggesting a high use of pesticides in the areas.
Macrodebris
Plastic debris is categorized as macrodebris when it is larger than 20 mm. These include items such as plastic grocery bags. Macrodebris are often found in ocean waters, and can have a serious impact on the native organisms. Fishing nets have been prime pollutants. Even after they have been abandoned, they continue to trap marine organisms and other plastic debris. Eventually, these abandoned nets become too difficult to remove from the water because they become too heavy, having grown in weight up to 6 tons.
Decomposition of plastics
Plastics themselves contribute to approximately 10% of discarded waste. Many kinds of plastics exist depending on their precursors and the method for their polymerization. Depending on their chemical composition, plastics and resins have varying properties related to contaminant absorption and adsorption. Polymer degradation takes much longer as a result of saline environments and the cooling effect of the sea. These factors contribute to the persistence of plastic debris in certain environments. Recent studies have shown that plastics in the ocean decompose faster than was once thought, due to exposure to sun, rain, and other environmental conditions, resulting in the release of toxic chemicals such as bisphenol A. However, due to the increased volume of plastics in the ocean, decomposition has slowed down. The Marine Conservancy has predicted the decomposition rates of several plastic products. It is estimated that a foam plastic cup will take 50 years, a plastic beverage holder will take 400 years, a disposable nappy will take 450 years, and fishing line will take 600 years to degrade.
Organic
pollutants in the marine environment
It
has long been known that specific toxins accumulate in the natural
environment and in living organisms, causing damage to health. As a
result, the use of many of these chemicals is now prohibited.
However, new toxic substances that were not initially recognized as a
threat are frequently detected in the environment. Polyfluorinated
compounds (PFCs) are one current example. There is still no solution
to this problem
The
downside of consumption
Chemical-based products are found in plastic casing for computers, in athletic-hall flooring, in rubber soles for jogging shoes – the applications are endless. In consequence, a very wide range of chemicals is used in industry today. According to the Organisation for Economic Co-operation and Development (OECD), approximately 100,000 different chemical substances are currently on the market worldwide. In Europe alone, approximately 10,000 chemicals are produced and marketed annually in amounts of greater than 10 tonnes. It is estimated that between 1 and 3 per cent of these chemicals are problematical. These environmentally relevant pollutants include heavy metals such as lead and mercury, which are released into the environment by the burning of oil, mining activities, and industrial emissions and effluents. Persistent organic pollutants, known as POPs, are another problematical substance category.
Poisonous
and persistent – POPs
The
Stockholm Convention on Persistent Organic Pollutants adopted in 2001
deals with persistent organic pollutants (POPs), i.e. substances that
possess toxic properties and resist degradation. They include
pesticides such as DDT and lindane, industrial chemicals such as
polychlorinated biphenyls (PCBs), and substances such as dioxins,
which are the unwanted by-products of manufacturing and combustion
processes. As these substances are highly stable and therefore
non-degradable to a large extent, they can be transported over long
distances and accumulate in the environment. POPs cause problems
because they are stored in the fatty tissue or organs of animals,
where they can have toxic effects. For example, they can disrupt the
endocrine system, cause cancer or genetic defects, and weaken the
immune system. Various effects of POPs on marine mammals have been
investigated. Studies of Baltic ringed seals (Phocahispida) and grey
seals (Halichoerusgrypus) found uterine occlusions, stenoses and
tumours, resulting in reduced reproductive ability. Other observed
effects included colonic ulcers, as well as reduced bone density,
which led to changes in the skeletal system. In seals and porpoises,
researchers found indications that POPs depress the immune and
endocrine systems. A further topic of discussion in this context is
whether these pollutants and the weakening of the immune system
affect the spread of epidemics, such as the disease that killed
thousands of seals in the North Sea in 1988 and again in 2002 –
probably an epidemic of the phocine distemper virus. Humans mainly
ingest POPs from food and drinking water, but also from the air
(mainly by breathing in dust particles) and through the skin (through
direct contact with the chemicals). The highest concentrations of
POPs are generally found in marine mammals and humans, both of which
are at the top of the food chain.
Polyfluorinated
compounds: a fresh cause for concern
Besides
the “classic” POPs, mentioned above, new types of persistent
toxic compounds of non-natural origin were identified in the
environment at the end of the 1990s, which could not be detected
before as the appropriate technology and analytical methods had not
yet been developed. These include polyfluorinated compounds (PFCs),
which have been used in a wide variety of every-day applications for
more than 50 years. PFCs are mainly used as fluoropolymers in the
textile industry, for example, in the manufacture of breathable
membranes for outdoor clothing, and in the paper industry in the
production of water-, stain- and grease-proof paper (e.g. fast-food
packaging). They are also used for surface treatment of furniture,
carpets and clothing textiles and in non-stick coatings for cookware
(such as Teflon frying pans). It is believed that a total of six
manufacturers have produced around 4500 tonnes of PFCs every year
over the past decade: a relatively small amount compared with other
chemicals. This group of substances is significant nonetheless, due
to its environmentally relevant properties, as some PFCs are highly
bio-accumulative in organisms. At present, more than 350 different
PFCs are known to exist. The best-known is perfluorooctanesulfonic
acid, more commonly known as PFOS. Based on animal experiments with
PFOS, researchers conclude that repeated exposure can have an
extremely adverse effect on human health; among other possible
effects, it may cause damage to the liver. PFOS may also be
carcinogenic, and it is also thought to impair the development of
progeny. PFOS therefore recently became the first PFC to be listed as
a persistent organic compound (POP) under the Stockholm Convention,
which means that it is now on the list of particularly hazardous
chemicals for which a worldwide ban is to be imposed.
Occurrence
of polyfluorinated compounds
Polyfluorinated
compounds (PFCs) have been industrially manufactured for around half
a century, but it has only recently been possible to detect their
presence in the environment due to new chemical and analytical
techniques. Natural origins of these chemicals are not known to
exist, and yet today PFCs can be detected in water, soil, air and
living organisms worldwide – including humans. High levels of PFCs
have been found in nu me rous foods as well as in human blood and
breast milk. The distribution of PFOS in the environment is
particularly well-researched. High concentrations of these substances
have been detected in fish, seals and sea birds worldwide and, above
all, in Arctic polar bears, which are at the top of the food chain.
Researchers from Canada and Denmark have reported a sharp rise in
PFOS concentrations in liver samples taken from polar bears in
Canada, Alaska and Greenland in recent decades. Compared to other
environmentally relevant POPs, such as polychlorinated biphenyls,
PFCs are found in much higher concentrations. In Swedish studies of
human blood from 1994 to 2000, the mean PFC concentration was 20 to
50 times higher than the concentration of the polychlorinated
biphenyls and about 300 to 450 times higher than that of
hexachlorobenzene, two “classic” organic pollutants that have
been recognised as hazardous for decades.
Transport
of PFCs
The
detection of PFCs and especially PFOS in marine mammals such as
Arctic seals and polar bears, and even in the blood of the Arctic’s
human inhabitants, the Inuit, raises the question of transportation:
How did these substances end up in the sea and even in the Arctic?
There are numerous different sources of PFCs. They are released, for
example, during the use of the everyday consumer durables mentioned
above – from carpeting, outdoor clothing, cookware and fast-food
packaging. However, in Germany, relatively large concentrations of
PFCs also enter the rivers from municipal and industrial wastewater
treatment plants, which cannot capture these substances. The rivers
then wash these substances into the North Sea. From here, they are
carried by the main North Sea and Atlantic Ocean currents to the
Arctic, where they are ingested by microorganisms in the water and
thus enter the food chain, bioaccumulating in larger organisms and
finally in the organs of polar bears and humans. PFCs are also
transported long distances through the atmosphere by the movement of
air masses. Compounds such as PFOS are not volatile, but volatile
precursor compounds escape into the atmosphere during the
manufacturing process. Physical and chemical processes that take
place in the atmosphere then convert these chemical precursors into
stable end products such as PFOS. These are removed from the air by
precipitation and enter the seawater in soluble form or bound to dust
particles, or are deposited on land or ice surfaces. PFCs can thus
travel great distances and can be detected in the environment a long
way from their place of origin or use.
Protection
from new pollutants
Today
PFCs are distributed all over the world. They are found in water, in
the air, in living organisms and even in our own bodies. They are
likely to persist for generations. This group of substances clearly
shows that it is impossible to predict all the environmental impacts,
or the delayed effects, of new chemical substances. In the future
too, it is likely that some substances that were initially regarded
as harmless, but whose undesirable effects can only be discerned
after some time has elapsed, will be detected in the marine
environment. Nowadays, however, intensive efforts are being made to
limit the further global spread of pollutants. For example, risk
assessments are carried out before chemicals are licensed for use, in
order to determine to what extent they could constitute a hazard.
There are also various voluntary renunciation schemes for producers,
as well as relevant legislation. In other words, a start has been
made.
Litter
– pervading the ocean
Every
year, large amounts of litter enter the sea. As plastics are
particularly durable, the mass of plastic debris in the world’s
oceans is steadily increasing – often with fatal consequences for
countless sea creatures. Microscopic breakdown products from
plastics, which scientists have only recently started to study in
detail, may also pose a threat. Although the problem has existed for
some time, there is still no effective strategy in place to turn the
tide on marine litter.
Litter:
Where does it come from?
Take
a stroll along any beach after a storm and you will get an idea of
just how much litter is floating around in the world’s oceans: the
sand is strewn with plastic bottles, fish boxes, light bulbs,
flip-flops, scraps of fishing net and timber. The scene is the same
the world over, for the seas are full of garbage. The statistics
are alarming: the National Academy of Sciences in the USA estimated
in 1997 that around 6.4 million tonnes of litter enter the world’s
oceans each year. However, it is difficult to arrive at an accurate
estimate of the amount of garbage in the oceans because it is
constantly moving, making it almost impossible to quantify. A further
complicating factor is that the litter enters the marine environment
by many different pathways. By far the majority originates from
land-based sources. Some of it is sewage-related debris that is
washed down rivers into the sea, or wind-blown waste from refuse
dumps located on the coast, but some of it comes from careless beach
visitors who leave their litter lying on the sand. Shipping also
contributes to the littering of the oceans: this includes waste from
commercial vessels and leisures that is deliberately dumped or
accidentally lost overboard and, above all, torn fishing nets. As
most of the litter is plastic, which breaks down very slowly in water
and may persist for decades or even centuries, the amount of debris
in the marine environment is constantly increasing. Scientific
studies have revealed regional variations in the amount of litter in
the sea. In many regions, researchers have reported quantities of
floating plastic debris in the range of 0 to 10 items of debris per
square kilometre. Higher values were reported in the English Channel
(10 to 100 items/square kilometre), but in Indonesia’s coastal
waters, 4 items of debris in every square metre were reported –
many orders of magnitude above the average. The problem does not only
affect the coastal areas, however. Propelled by the wind and ocean
currents, the litter – which is highly persistent in the
environment – travels very long distances and has become widely
dispersed throughout the oceans. It can now even be found on remote
beaches and uninhabited islands. In 1997, researchers discovered that
the floating debris accumulates in the middle of the oceans – in
the North Pacific, for example, where massive quantities of water
constantly circulate in a swirling vortex of ocean currents known as
gyres, which extend for many hundreds of kilometres and are driven by
light winds. The plastic debris ends its journey here. The litter
circulates constantly, with new debris being added all the time.
Environmental researchers call it the Great Pacific Garbage Patch.
The concentration of litter is extremely high, which is particularly
worrying if we consider that it is located in the open sea thousands
of miles from the coast. Scientists have detected up to 1 million
plastic particles per square kilometre here. Much of the debris
consists of small fragments of plastic that were fished out of the
water using fine-mesh nets. By contrast, studies in the English
Channel, and many other surveys carried out elsewhere, are based on
the visual method of quantification, which means that scientists
simply count the pieces of debris that are visible as they pass by in
their research vessels. The amount of floating oceanic debris is
immense. However, it is thought that around 70 per cent of the litter
eventually sinks to the sea floor. The worst-affected areas are the
coastal waters of densely populated regions or regions with a high
level of tourism, such as Europe, the US, the Caribbean and
Indonesia. In European waters, up to 100,000 pieces of litter visible
to the naked eye were counted per square kilometre on the sea floor.
In Indonesia, the figure was even higher – up to 690,000 pieces per
square kilometre. Much of the litter is harmless, but some of it is
responsible for marine mammal deaths. Seals and otters, for example,
which feed on fish, crabs and sea urchins on the sea floor, are
frequent casualties.
Tiny
but still a threat – microplastics
For
some years now, scientists have increasingly turned their attention
to what remains of the plastic debris after prolonged exposure to
wave action, saltwater and solar radiation. Over time, plastics break
down into very tiny fragments, known as “microplastics”.
Microplastics are now being detected in ocean waters, sand and
sea-floor sediments all over the world. These tiny particles, just 20
to 50 microns in diameter, are thinner than a human hair. Marine
organisms such as mussels filter these particles out of the water.
Experimental analyses have shown that the microplastics accumulate
not only in the stomachs but also in the tissue and even the body
fluids of shellfish. The implications are still unclear, but as
many plastics contain toxic substances such as softeners, solvents
and other chemicals, there is concern that microplastics could poison
marine organisms and, if they enter the food chain, possibly humans
as well.
The
silent killers – ghost nets
Derelict
fishing gear – known as “ghost nets” – poses a particular
threat to marine wildlife. These are nets which have torn away and
been lost during fishing activities, or old and damaged nets that
have been deliberately discarded overboard. The nets can remain
adrift in the sea and continue to function for years. They pose a
threat to fish, turtles, dolphins and other creatures, which can
become trapped in the nets and die. The tangled mass then snags other
nets, fishing lines and debris, so that over time, the ghost nets
become “rafts”, which can grow to hundreds of metres in diameter.
Some of these nets sink to the sea floor, where they can cause
considerable environmental damage. Propelled by currents, they can
tear up corals and damage other habitats such as sponge reefs.
World's first ocean plastic-cleaning machine set to tackle Great Pacific Garbage Patch
Scientists
are preparing to launch the world's first machine to clean up the
planet's largest mass of ocean plastic.
The
system, originally dreamed up by a teenager, will be shipped out this
summer to the Great Pacific Garbage Patch, between Hawaii and
California, and which contains an estimated 1.8 trillion pieces of
plastic.
It will be the first ever attempt to tackle the patch since it was discovered in 1997.
The experts believe the machine should be able to collect half of the detritus in the patch – about 40,000 metric tons – within five years.
In the past few weeks they have been busy welding together giant tubes that will sit on the surface of the sea and form the skeleton of the machine, creating the largest floating barrier ever made.
The
Great Pacific Garbage Patch (GPGP) spans 617,763 sq miles - more than
twice the size of France, and contains at least 79,000 tons of
plastic, research found last month.
Most
of it is made up of “ghost gear” – parts of abandoned and lost
fishing gear, such as nets and ropes – often from illegal fishing
vessels.
Ghost gear kills more than 100,000 whales, dolphins and seals each year, according to scientific surveys. Seabirds and other marine life are increasingly being found dead with stomachs full of small pieces of plastic.
Creatures
eat plastic discarded in the sea thinking it’s food but then starve
to death because they are not feeding properly.
Others
are trapped and die of starvation or are strangled or suffocated by
ghost gear.
More
than 8 million tons of plastic is dumped into our oceans every year,
according to the US-based Plastic Oceans Foundation.
Up
to 90 per cent of the world’s plastic items are never recycled, and
scientists believe nearly every piece ever created is still in
existence somewhere, in some form, with most going into landfill or
the environment. Single-use plastic, such as water bottles and
nappies, take 450 years to break down.
The system to tackle the largest swirling mass of rubbish in the Pacific has been designed by a non-profit technology firm called The Ocean Cleanup, set up by Dutch inventor Boyan Slat when he was an 18-year-old aerospace engineering student.
“The
plastic pollution problem has always been portrayed as something
insolvable. The story has always been ‘OK, we can’t clean it up -
the best we can do is not make it worse’. To me that’s a very
uninspiring message,” said Mr Slat.
“What
I really hope is that the ocean clean-up in this century can be a
symbol for us using technology to make things better.”
The
clean-up contraption consists of 40ft pipes – ironically made of
plastic – that will be fitted together to form a long, snaking
tube.
Filled
with air, they will float on the ocean's surface in an arc, and have
nylon screens hanging down below forming a giant floating dustpan
to catch the plastic rubbish that gathers together when moved by the
currents. The screens, however, will be unable to trap microplastics
– tiny fragments.
Fish
will be able to escape the screens by swimming underneath them.
The
Ocean Cleanup team aim to launch the beginnings of the system from
the shores of San Francisco Bay within weeks, start it working by
July and then keep extending it.
They
plan to have 60 giant floating scoops, each stretching a mile from
end to end. Boats will go out to collect debris every six to eight
weeks.
Mr
Slat was 16 and still at school when he was diving in Greece and
first saw for himself the amount of plastic polluting the
sea.
“There
were more bags than fish down there,” he recalls. Two years later
he came up with a solution, quit university after six months and set
up The Ocean Cleanup as a company.
Following
a crowdfunding campaign that raised £1.57m and later investment
bringing the total to £28.56m, the company now has 65 paid staff,
including researchers and engineers.
Mr
Slat, 23, says the first plastic to arrive on shore will be a major
milestone.
“We
as a humanity created this problem, so I think it's our
responsibility also to help solve it,” he said.
He
told US business website Fast Company: “Most of the plastic is
still large, which means that in the next few decades if we don’t
get it out, the amount of microplastics can be tenfold or 100-fold.
It’s this problem that’s waiting out there to magnify many times
unless we can take it out.”
Corn Starch Packaging
A company that needs to package their products have choices in which material they use for packaging. Traditionally companies could use polystyrene materials, which are commonly injection molded or extruded for packaging. However, companies are becoming aware of the environmental impact of polystyrene, such as the inability of the material to biodegrade.
Polystyrene packaging is unable to be recycled and would have to be disposed of in a landfill. Therefore companies are looking to use recyclable and biodegradable packaging materials where possible. With starch-based packaging materials, the product is biodegradable but is not an inferior material when compared with synthetic polymer materials.
Corn
Starch Based Materials
Instead
of using packaging materials made from synthetic polymers, a new
material has been developed using polylactic acid (PLA), which is
made from fermented sugars, usually from cornstarch. The materials
made from PLA are biodegradable which is important for the
environment.
If disposed of correctly, packaging material made from cornstarch will break down into carbon dioxide and water within several months. However, if the material is not disposed of correctly corn starch based material will take longer to decompose, especially if there is no oxygen or light available.
The corn-based packaging material is preferable for companies as the raw material, corn is sustainable, cheap, and easy to produce. Corn is the least expensive and most abundant source of commercially available sugar. Synthetic polymer materials are produced from petroleum, a non-sustainable item that can be expensive depending on the price of oil.
Corn
starched packaging does have some interesting advantages over
synthetic materials such as a reduced static electricity.
Properties
of PLA Materials
Materials
made from PLA have advantages and disadvantages over synthetic
polymer materials. Some properties of PLA are shown below:
1.
Food Safe
2. Resistant to food fats/oils
3. Good for print applications
4. Low flammability
5. High aroma barrier
6. UV resistant
7. Compostable
8.
Recycled
by regrinding
PLA
Grading
The PLA material can be made into a fiber or a film. There are a number of PLA grades that are available for commercial customers which can be used for a number of different applications.
Issues
with PLA Materials
There have been issues with PLA materials that have caused some criticism of the product.
Issues with Recycling – As PLA materials need to composted rather than recycled, like paper and cardboard, companies need to separate the PLA materials and the regular recyclable materials. Currently, there are only just over a hundred composting facilities in the US.
Issues with Composting – Although PLA materials are able to be composted, the correct conditions must exist. If the material is deposited in a landfill without the proper oxygen and light, the PLA material may not decompose for decades.
Issues with Usage – PLA materials can be used for many applications but this does not compare to the uses of the more common plastic polyethylene terephthalate (PET), which is used to make bottles consumers use every day.
Summary
Packaging
is important to protecting materials and companies will use the best
material for the job. The advent of cornstarch-based materials has
allowed companies to choose a packaging material that is good for the
environment and still suitable for their packaging need.
The
issues with PLA are well documented but the availability of PLA
packaging materials is the first step in reducing packaging waste and
helping the environment.
As
supply chains become increasingly aware of the importance of moving
toward sustainability, greener options like corn starch packaging are
being recognized as more than just a public relations
alternative.
By
making a shift toward sustainability, supply chains ultimately lower
their costs because the raw materials needed to make corn starch
packaging is cheap and easy to produce. The increased usage of corn
starch packaging will bring its costs down further - and therefore
will allow this greener option to become even more readily available.
Zero waste
What is Zero Waste, and why is it a thing?
Zero Waste is a philosophy and lifestyle most popularly pioneered by Bea Johnson starting in 2008. (The term “Zero Waste” was actually coined many decades earlier, and of course these philosophies are not brand new since 2008: many of our grandparents practiced Zero Waste, but they just called it “Life” back then. However, in my opinion it is Johnson’s blog and book, both titled Zero Waste Home [the latter of which is available in 17 languages], that catapulted Zero Waste into the modern version of the ever-growing global movement it is today.)
Zero Waste says that we, both as individuals and as families, businesses, governments, etc., should do everything possible to minimize the amount of physical waste we produce, with the ultimate goal being…Zero Waste. Of course, achieving *actual* Zero Waste is nigh impossible—even Johnson herself (along with her family and dog) produce one small jar of trash per year. So if you’re the kind of person who gets turned off by extreme language, feel free to change the term Zero Waste in your head to anything that is more meaningful to you: Minimal Waste, Less Waste, or whatever you like.
I don’t want to just be “less,” I want to be Zero. Zero is the goal.
Zero Waste is a philosophy that encourages the redesign of resource life cycles so that all products are reused. The goal is for no trash to be sent to landfills, incinerators, or the ocean. Only 9% of plastic is actually recycled. The process recommended is one similar to the way that resources are reused in nature. The definition adopted by the Zero Waste International Alliance (ZWIA) is:
Zero Waste: The conservation of all resources by means of responsible production, consumption, reuse, and recovery of all products, packaging, and materials, without burning them, and without discharges to land, water, or air that threaten the environment or human health.
Zero Waste refers to waste management and planning approaches which emphasize waste prevention as opposed to end-of-pipe waste management. It is a whole systems approach that aims for a massive change in the way materials flow through society, resulting in no waste. Zero waste encompasses more than eliminating waste through recycling and reuse, it focuses on restructuring production and distribution systems to reduce waste. Zero waste is more of a goal or ideal rather than a hard target. Zero Waste provides guiding principles for continually working towards eliminating wastes.
Advocates expect that government regulation is needed to influence industrial choices over product and packaging design, manufacturing processes, and material selection.
Advocates say eliminating waste decreases pollution, and can also reduce costs due to the reduced need for raw materials.
Health
A major issue with landfills is hydrogen sulfide, which is released during the natural decay of waste. Studies have shown a positive association between increased lung cancer mortality rates and increased morbidity and mortality related to respiratory disease and hydrogen sulfide exposure. These studies also showed that the hydrogen sulfide exposure increased with proximity to the landfill.[8]
Household chemicals and prescription drugs are increasingly being found in large quantities in the leachate from landfills. This is causing concern about the ability of landfills to contain these materials and the possibility of these chemicals and drugs making their way into the groundwater and the surrounding environment.[9]
Zero waste promotes a circular material flow that allows materials to be used over and over, reducing the need for landfill space.[10] Through zero waste the number of toxins released into the air and water would be decreased and products examined to determine what chemicals are used in the production process.
Health Issues related to landfills:
Birth Defects and Low birth weight: Associated with close proximity to landfills, exposure to particle matter and Nitrogen dioxide
Respiratory disease and Lung Cancer: Related to the release of Hydrogen Sulfide
Zero waste’s promotion of a cyclical product life can help reduce the need to create and fill landfills. This can help reduce incidences of respiratory diseases and birth defects that are associated with the toxins released from landfills. Zero waste also can help preserve local environments and drinking water sources by preventing pollutants from entering the ecosystem.
Present day
There is a lack of consensus among environmentalists as to whether the Zero Waste movement is in conflict with, or supportive of, sustainable life cycle of resource consumption. Critics of Zero Waste point out that a material could be reuseable, organic, non-toxic, and renewable but still be ethically inferior to single use products. Bags made of baby seal pelts or tiger skin, for example, theoretically meet the definitions of "zero waste", but are hardly superior to single use plastic bags. Similarly, a toxic material, such as lead in solder, may be replaced by less toxic materials like tin and silver. But if the mining of silver and tin releases more mercury or damages sensitive coral islands, the protection of landfills in developed nations is hardly paramount. While Zero Waste advocates have sophisticated answers as to why these examples do not meet the definition of Zero Waste (e.g., that the bodies of seals and tigers, or mining waste, is of equal concern), critics say that Life Cycle Analysis, habitat protection, carbon neutralization, or "Zero Extinction" are more environmentally astute philosophies than waste-centric measures. The simple accounting of measurable waste diversion, reuse, recycling rates, etc. is an attractive and useful tool, but a campaign based on a goal of literally stopping the last 5% percent of waste might well come at the expense of other environmental and sustainability goals.
Biodegradable plastic is the most prominent example. One side argues that biodegradation of plastic is wasteful because plastic is expensive and environmentally damaging to make. Whether made of starch or petroleum, the manufacturing process expends all the same materials and energy costs. Factories are built, raw materials are procured, investments are made, machinery is built and used, humans labor and make use of all normal human inputs for education, housing, food etc. Even if the plastic is biodegraded after a single use, all of those costs are lost so it is much more important to design plastic parts for multiple reuse or perpetual lives. The other side argues that keeping plastic out of a dump or the sea is the sole benefit of interest.
The movement continues to grow among the youth around the world under the organization Zero Waste Youth, which originated in Brazil and has spread to Argentina, Puerto Rico, Mexico, the United States, and Russia. The organization multiplies with local volunteer ambassadors who lead zero waste gatherings and events to spread the zero waste message.
Reduce, reuse and recycle
Zero waste is poorly supported by the enactment of government laws to enforce the waste hierarchy of refuse, reduce, reuse, recycle and rot (compost). In practice, these laws invariably emphasize destruction and recycling, while the reuse component is marginalized.
A special feature of Zero Waste as a design principle is that it can be applied to any product or process, in any situation or at any level. Thus it applies equally to toxic chemicals as to benign plant matter. It applies to the waste of atmospheric purity by coal-burning or the waste of radioactive resources by attempting to designate the excesses of nuclear power plants as "nuclear waste". All processes can be designed to minimize the need for discard, both in their own operations and in the usage or consumption patterns which the design of their products leads to. Recycling, on the other hand, deals only with simple materials.
Zero Waste can even be applied to the waste of human potential by enforced poverty and the denial of educational opportunity. It encompasses redesign for reduced energy wasting in industry or transportation and the wasting of the earth's rainforests. It is a general principle of designing for the efficient use of all resources, however defined.
The recycling movement may be slowly branching out from its solid waste management base to include issues that are similar to the community sustainability movement.
Zero waste, on the other hand, is not based in waste management limitations to begin with but requires that we maximize our existing reuse efforts while creating and applying new methods that minimize and eliminate destructive methods like incineration and recycling. Zero Waste strives to ensure that products are designed to be repaired, refurbished, re-manufactured and generally reused.. ("What is Zero Waste?", para 2).
Online web services, like Free Cycle or the reGives Network have risen in popularity over the last decade where locals can give items that they no longer need to others locally in an effort to keep items out of landfills and work toward a zero waste lifestyle.
Result
Let’s save our ‘Mother Earth’ It is the only planet in our solar system on which life exists with incredible biodiversity. People all over the world celebrate this grand event to protect flora and fauna and to clean up the earth on which we live. The noble ‘Earth’ has bestowed the human beings with incredible and beautiful nature in the form of mountains, rivers, forests and various natural resources that helped human beings to survive and initiated our evolution.

Бұл курс Қазақстан Республикасы Оқу-ағарту министрлігімен келісілген